Ladders

COMAR/Mark/1 Pilot Ladder

US Coast Guard & SOLAS Approved

Made in the USA

    Features

  • 12-1/4 inch Step Spacing
  • Internal Peripheral Tubular Reinforcement
  • Buoyant High Impact Elastomer, Especially Forumulated
  • Ultra Violet Resitant, Safety Orange Color Impregnated Highly Visible, No painting Required, Easy Cleaning
  • Resists Fractures & Parting Under Severe Conditions
  • Chemically Bonded Non Slip Abrasive Grit Tread Surface
  • Wind Resistant Spreaders With Hand Holes
  • Overall Step Size: 20" x 4-1/2" x 1-1/8" (508 x 115 x 28mm)
  • Spreader Step Batten: 5'10" x 4-1/2" x 1-1/8" (1.8m x 115mm x 28mm)
  • Distance Between Spreaders: 10' (3m)
  • Distance Between Steps: 12-1/4" (310mm)
  • Up to 160 ft
Ladders

COMAR / Debarkation /
Embarkation Ladder

US Coast Guard & SOLAS Approved

Made in the USA

    Features

  • Replaces obsolete old style "Jacob's" Ladder
  • 15 inch Step Spacing, (+/-) 1/4 inch
  • Not same spacing as Pilot Ladder
  • Steps are secured to side ropes using stainless steel fasteners and patented COMAR Wedge Assembly
  • Uses Debarkation Ladder steps
  • Rope:2-1/4" circ. (3/4" dia.) 3-strand soft feel polyester ropes over a core of color that contrasts with the ultra strong ropes to eliminate bounce and act as an early warning of wear (14,310lbs Min Breaking Strength)
  • Step: Buoyant high impact elastomer ultra violet resistant safety impregnated, has internal tubular and patented internal collar reinforcement. Top of step has 1/8" raised diamond surface approx 3-3/4" x 14" coated with non-skid abrasive grit and set back from the edges to eliminate cutting of the hands while rigging the ladder on deck.
  • Eliminate marlin seizings (wippings)
  • Exceeds 2,000lb required test load by 100%
  • Half the weight of a chain ladder, rolls easy for stowage, no metal ends to chip paint on deck or hull
  • Available in standard lengths to 320ft, longer length by special order
  • Overall Step Size: 20" x 4-1/2" x 1-1/8" (508 x 115 x 28mm)
  • Distance Between Steps: 15" or 16" (381 or 406mm)
Ladders

COMAR Workboat Ladder

US Coast Guard & SOLAS Approved

Made in the USA

    Features

  • Replaces obsolete old style "Jacob's" Ladder
  • 12-1/4 inch Step Spacing, (+/-) 1/4 inch
  • Not same spacing as Pilot Ladder
  • Steps are secured to side ropes using stainless steel fasteners and patented COMAR Wedge Assembly
  • Uses Debarkation Ladder steps
  • Rope:2-1/4" circ. (3/4" dia.) 3-strand soft feel polyester ropes over a core of color that contrasts with the ultra strong ropes to eliminate bounce and act as an early warning of wear (14,310lbs Min Breaking Strength)
  • Step: Buoyant high impact elastomer ultra violet resistant safety impregnated, has internal tubular and patented internal collar reinforcement. Top of step has 1/8" raised diamond surface approx 3-3/4" x 14" coated with non-skid abrasive grit and set back from the edges to eliminate cutting of the hands while rigging the ladder on deck.
  • Eliminate marlin seizings (wippings)
  • Exceeds 2,000lb required test load by 100%
  • Half the weight of a chain ladder, rolls easy for stowage, no metal ends to chip paint on deck or hull
  • Available in standard lengths to 320ft, longer length by special order
  • Overall Step Size: 20" x 4-1/2" x 1-1/8" (508 x 115 x 28mm)
  • Length up to 250 ft. available
Ladders

COMAR / Submarine Ladder

US Coast Guard & SOLAS Approved

Made in the USA

    Features

  • 12-1/4 inch Step Spacing
  • 14 steps at 14 ft. 7 inches
  • 4 St/St thimbles spliced above top step with 2 master links
  • 2 St/St thimbles spliced below bottom step